Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.
1 Select the band (FM 1 – 3, AM) you want to store stations into (in this example, FM 1).
Each time you press the button, the FM band
changes as follows:
FM1
FM2
FM3 
AM
2 Tune in to a station of 88.3 MHz.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
3 Press and hold the button (in this example, 1) for more than 2 seconds.
Preset number “P1” flashes for a while.
4 Repeat the above procedure to store other stations into other preset numbers.
Notes:
•A previously preset station is erased when a new station is stored in the same preset number.
•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
Tuning in to a preset station | ENGLISH | ||
|
| ||
You can easily tune in to a preset station. | |||
| |||
Remember that you must store stations first. If you |
| ||
have not stored them yet, see “Storing stations in |
| ||
memory” on pages 6 – 7. |
| ||
1 Select the band (FM1 – 3, AM).
FM1
FM2
FM3 
AM
2 Select the number (1 – 6) for the preset station you want.
7 | 8 | 9 | 10 | 11 | 12 |
7
