ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 9) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
See page 9 for details.
2 Select “BAS” (bass), “TRE” (treble)
SEL
3 Adjust the bass or treble level.
See page 9 for details.
4 To turn on or off the super bass function
Each time you press S.BASS, the super bass function turns on and off alternately. See page
9 for details.
S.BASS
5 Repeat step 2 and 3 to adjust the other items.
6 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
7 Repeat the same procedure to store other setting.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 9.
10
