![](/images/new-backgrounds/1297332/29733215x1.webp)
![](/images/new-backgrounds/1297332/29733215xi2.webp)
![](/images/new-backgrounds/1297332/29733215xi3.webp)
TAPE OPERATIONS
ENGLISH
S.BASS
SEL
DISP
7 | 8 | 9 | 10 | 11 | 12 |
Listening to a cassette
You can playback type I (normal) tapes.
1 Turn on the power.
Note on
If a cassette is already in the cassette compartment, tape play starts automatically. However, it is not recommended to leave the cassette in the compartment when turning off the power or ignition key. It may damage the tape head and the cassette.
2 Insert a cassette into the cassette compartment.
When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one.
•You cannot change the source if the cassette is still in the cassette compartment.
To change source, you must eject the cassette first.
•You can also eject the cassette by pressing 0 while the unit is turned off.
To fast-wind a tape
Press in ¡ or 1.
The tape will be wound in the direction of the arrows ( ¡ or 1 ).
3 Select the tape direction.
Press the both buttons at the same time. Each time you press the button, the tape direction changes alternatively – forward
( ) and reverse (
).
Tape direction
To restart playback, lightly press the other button which is not pressed in ( 1 or ¡ ).
8