To play back tapes recorded with the Dolby B NR
Press and hold RPT (Dolby B/repeat) to set the Dolby B NR* system.
The indicator lights up, and “DOLBY B” appears on the display for several seconds.
To cancel the Dolby B NR, press and hold
RPT (Dolby B/repeat) again so that the
indicator goes off.
*Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the
Prohibiting cassette ejection
You can prohibit cassette ejection and “lock” a cassette in the cassette compartment.
Press and hold TAPE 23 and for more than 2 seconds.
“NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked.”
To cancel the prohibition and “unlock” the
cassette, press and hold TAPE 23and for more than 2 seconds again.
“EJECT OK” flashes for about 5 seconds, and this time the cassette is “unlocked.”
Note:
If you press 0while cassette ejection is prohibited, the display panel flips down, but the cassette continues to play and cannot be ejected.
Finding the beginning of a tune |
|
| |
ENGLISH | |||
Multi Music Scan allows you to automatically start | |||
| |||
playback from the beginning of a specified tune. |
| ||
You can specify up to 9 tunes ahead of or before |
| ||
the current tune. |
|
During playback
Specify how many tunes ahead of or before the current tune the one you want is located.
Press ¢ to locate a tune ahead of the current tune on the cassette.
Press 4 to locate a tune before the current tune on the cassette.
Each time you press the buttons, the number changes up to ±9.
When the beginning of the specified tune is located, playback starts automatically.
Notes:
•While locating a specified tune:
–If the tape is rewound to its beginning, playback starts from the beginning of that side.
–If the tape is
•In the following cases, the Multi Music Scan function may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short non-recorded sections.
–Tapes with high level of noise or humming between tunes.
–The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.
17