JVC KS-FX815 Other convenient tape functions, Playing the current tune repeatedly, PSM see page

	Other convenient tape functions
ENGLISH
	Skipping the blank portions on the tape
	You can skip blank portions between the tunes
	(Blank Skip).
	When this function is on, the unit skips blank
	portions of 15 seconds or more, fast-forwards to
	the next tune, then starts playing it.
	• See also “Changing the general settings (PSM)”
	on page 22.
	1 Press and hold SEL (select) for more
	than 2 seconds so that one of the
	PSM items appears on the display.
	(PSM: see page 23.)

2 Press ¢ or 4 to select “B. SKIP” (blank skip).

3 Turn the control dial clockwise to select “ON.”

Now Blank Skip is

activated.

4 Press SEL (select) to finish the setting.

To cancel Blank Skip, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat Play).

Press RPT (repeat/Dolby B) while playing a tune you want to hear over again.

Each time you briefly press the button, Repeat Play turns on and off alternately.

Lights up when Repeat Play is turned on.

When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again.

To cancel Repeat Play, press RPT again so that the RPT indicator goes off.

Note:

In the following cases, Blank Skip and Repeat Play may not operate correctly:

–Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes.

–Tapes with short non-recorded sections.

–Tapes with high level noise or humming between tunes.

–The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.

18