JVC KT-SR2000 manual S-Seek Function-Memory Button, To store the information

S-Seek Function—Memory Button

You can store the current Program Definition Text (PDT: Artist Name and Song title) with a total of 20 Artist/Song Title combinations, then by using the stored information, you can make your JVC PnP search the current incoming Sirius signal and alert you when a saved song is being played—S-Seek function.

To store the information

While your JVC PnP is showing either of the following screens, press MEMO (memory).

Normal Operation Preset Tuning mode

The current program data information is stored in memory.

If you have already stored the same PDT...

JVC PnP checks the data already stored in memory, and compares with the newly selected PDT.

If it has been already stored, no entry will be made newly to avoid duplication.

If you have already stored 20 PDTs...

“S-Seek Full” will flash on the display for a while, then the “Replace-Cancel” screen appears.

1. Press CH 5 / ∞ (or CH + / –) to select either “Replace” or “Cancel”, then press SEL (or SELECT).

•Replace: To select the information to be overwritten with the new Artist/Song Title. After pressing SEL (or SELECT), the following screen appears (on the next page).

20