JVC KT-SR2000 manual Audio Level Options, Edit Code

Edit Code

You can change the access code (default code—1111) as you like.

1. Upon entering this mode, press the number keys

1 – 6 to enter the current access code (4-digit: default code—1111).

The “New Code” screen appears.

2. Press the number keys 1 – 6 to enter your new access code (4 digit).

The confirmation screen appears.

3. Press the number keys 1 – 6 to enter your new access code (4 digit) again.

The access code is now changed.

Note:

Limit acceptable lock code digits to 1 – 6.

7Audio Level Options

You can adjust the audio level and gain at the same time when you feel that the sound through your JVC PnP is too small or too loud.

Upon entering this mode, a horizontal bar graph is displayed.

Press CAT 3 / 2 (or CAT + / –) to adjust the audio level and gain, then press SEL (or SELECT).

•You can also use CH 5 / ∞ (or CH + / –) for adjustment.

26