JVC KT-SR2000 manual Main display 2 POWER

1Main display

2 (POWER)

Turns on and off the power.

3 MEMO (memory) (S-SEEK)

Stores and recalls the Artist/Song Title information.

4 BAND (P.TUNE)

Selects the 3 bands of stream presets; enters and exits from the Preset Tuning Mode.

5 CH (channel) 5 / ∞ (CH + / –), CAT (category) 2 / 3 (CAT – / +)

Navigate through streams, categories, and Menu screens.

6 SEL (SELECT)

•On the menu and stream list screens: Selects an item highlighted.

•On the Normal Operation or Preset Tuning Mode screens: Only on the main unit—returns to the previous stream if pressed and held. Also enables access to streams directly by number keys.

7DISP (display)

Changes text size of the artist name and song title if pressed. Also alternates the Normal Operation screen and the Stream List if pressed and held.

8MENU

Enters and exits from the Menu Options settings.

9Number keys 1 – 6 (0 – 9)

Enters the stream numbers (0 – 9) or preset numbers (1 – 6) directly.

pDIRECT

Enables access to streams directly by number keys.

qMUTE Mutes sounds.

wPREV (previous)

Returns to previous stream or previous status.

eInsulation sheet

When you use the remote controller for the first time, pull out this sheet.

Replacing the battery in the Remote Controller

Lithium coin battery	1. While pushing the lock lever (1),
(CR2032)	pull out the battery holder (2).
	2. Replace the new battery on the
2032	battery holder with the + side
CR	facing up.
3V
1	3. Insert the battery holder back into
2

position.

13