ENGLISH

Listening to the satellite radio (Only for KW-AVX830/KW-ADV793/KW-AVX730)

Before operating, connect either one of the following (not supplied) to the expansion port on the rear of the unit.

To listen to the SIRIUS Satellite radioSC-C1 and KS-SRA100

 

PnP, SC-VDOC1 and KS-SRA100
To listen to the XM Satellite radioJVC Smart Digital Adapter–XMDJVC100

 

CNP2000UC and CNPJVC1
Activating subscriptionFor SIRIUS Radio~Select “SAT” as the source. ( 10)

The SIRIUS Satellite radio starts updating all the SIRIUS channels. (See“GCI update”below.)

•Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.ŸCheck your SIRIUS ID.

AV Setup

Setup

 

Demonstration

Off

 

On

 

 

 

Wall Paper

 

 

Ambient

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Area Setting

US

 

Europe

SA

 

 

 

Sirius ID

 

112233445566

 

 

 

 

 

 

 

 

 

 

 

!Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474).

“Subscription updated Press any key to continue” appears on the screen once subscription has been completed.

KW-AVX830 KW-ADV793 KW-AVX730For XM Radio~Select “SAT” as the source. (10)

XM Tuner* starts updating all the XM channels. “Channel 1”is tuned in automatically. (See “GCI update”below.)

ŸCheck your XM Satellite radio ID labelled on the casing of the XM Tuner, or tune in to “Channel 0.”

The 8-digit (alphanumeric) ID number is displayed on the screen.To cancel the ID number display, select any channel other than“0.”

!Contact XM Satellite radio on the internet at <http://xmradio. com/activation/> to activate your subscription, or you can call 1-800-XM- RADIO (1-800-967-2346).

Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).

*XM Tuner: XMDirect TM Tuner Box or XMDirect2 Tuner System
GCI (Global Control Information) update

•If channels are updated after subscription, updating starts automatically, and no sound can be heard:

–For SIRIUS Satellite radio:“Updating”appears.

–For XM Satellite radio: “UPDATING” (when XMDJVC100 is connected) or “UNAUTH” (when CNP2000UC and CNPJVC1 are connected) appears.

•Update takes a few minutes to complete.

•Do not press any buttons or perform any operations until updating is completed.

22