Sound

 

Menu item

 

 

 

Selectable setting/item

 

 

 

Initial: Underlined

 

Fader/Balance

 

 

 

Fader : Adjust the front and rear speaker output balance.

 

Fader/Balance

 

Reset

F6 to R6; Initial 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fader

0

 

 

 

 

 

 

 

 

 

 

Balance 0

• When using a two-speaker system, set the fader to the center (0).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance : Adjust the left and right speaker output balance.

 

Back

 

 

Exit

L6 to R6; Initial 0

 

 

 

 

 

 

 

 

 

 

 

 

Press [5//2/3] or drag [

 

 

 

] to adjust.

 

 

 

 

 

 

 

 

• To clear the adjustment, press [Reset].

 

Volume Adjust *6

 

 

 

Adjust and store the auto-adjustment volume level for each source, comparing

 

 

 

 

 

 

 

 

to the FM volume level. The volume level will automatically increase or decrease

 

 

 

 

 

 

 

 

when you change the source.

 

 

 

 

 

 

 

 

 

 

 

 

• <Fix> appears if an FM broadcast is selected as the source.

 

 

 

 

 

 

 

 

–12to +12; Initial 00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subwoofer Level

 

 

 

Adjust the subwoofer output level.

 

 

 

 

 

 

 

 

00 to 08; Initial 08

 

 

 

 

 

High Pass Filter

 

 

 

Through: Select when the subwoofer is not connected.

 

 

 

 

 

 

 

 

On

: Select when the subwoofer is connected.

 

 

 

 

 

 

 

 

 

 

 

 

 

Low Pass Filter

 

 

 

Select the crossover frequency between the front/rear speakers and the subwoofer.

 

 

 

 

 

 

 

 

55Hz, 85Hz, 120Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Amplifier Gain

 

 

 

You can change the maximum volume level of this unit.

 

 

 

 

 

 

 

 

Off

: Deactivates the built-in amplifier.

 

 

 

 

 

 

 

 

Low

: VOL 00 to 30 (Select this if the maximum power of the

 

 

 

 

 

 

 

 

 

speakers is less than 50 W.)

 

 

 

 

 

 

 

 

High: VOL 00 to 50

If you change the setting from <High> to <Low> while the volume level is set higher than“VOL 30,”the unit automatically changes the volume level to“VOL 30.”

LoudnessYou can activate/deactivate the loudness function.

 

 

Off

: Cancels.

 

 

On

: Boost low and high frequencies to produce a well-balanced

 

 

sound at a low volume level.

 

Rear Speaker *7You can activate/deactivate the rear speakers.

 

 

• This setting takes effect only when Dual Zone is activated. (

28)

 

Off

: Deactivate the rear speakers.

 

 

On

: Activate the rear speakers.

 

*6 For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG Audio and the others.

*7 Only for KW-AVX838/KW-AVX830.

ENGLISH

35