JVC Setting the lighting sensor, Off, 34), Prox, Prox, Touch, Touch, see “, Panel-LED, Panel-LCD, turned on, touch panel, Prox./Motion sensor

ENGLISH

Setting the lighting sensor

You can change the condition for turning off/on the screen and the lights of the monitor panel buttons.

1 AV Setup

2	Setup
	Demonstration	Off	On
	Wall Paper		Ambient
3	Setup
	Beep	Off	On
	Telephone Muting	Off	Muting1 Muting2
	Lighting Sensor	Prox./Motion-LED
	Motion Sensitiv.	Mid	High
	Initialize		Enter
	Setup
	Beep		Off
	Telephone Muting	Prox./Motion-LED
	Lighting Sensor	Touch Panel-LED
	Motion Sensitiv.	Prox./Motion-LCD
	Initialize	Touch Panel-LCD
	Back		Exit

When any setting other than <Off> is selected, the screen and/or lights of the buttons (except ) are turned off when no operation is done for about 10 seconds.

The screen and/or the lights of the buttons are turned off/on as follows.

Prox./	Monitor panel buttons are turned
Motion-LED	off. They light up when your
	finger touches the touch panel
	or your hand moves closer to the
	Prox./Motion sensor.
Touch	Monitor panel buttons are turned
Panel-LED	off. They light up when your
	finger presses any button on the
	touch panel.
Prox./	The screen and the lights of the
Motion-LCD	monitor panel buttons are turned
	off. They turn on when your
	finger touches the touch panel
	or your hand moves closer to the
	Prox./Motion sensor.
Touch	The screen and the lights of the
Panel-LCD	monitor panel buttons are turned
	off. They turn on when your finger
	touches the touch panel.
Off	The screen and the lights of the
	monitor panel buttons are always
	turned on while the power is
	turned on.

•Pressing any button on the monitor panel also turns on the screen and/or the lights of the buttons.

•In the following cases, the screen and/or the lights of the monitor panel buttons are turned on regardless of the <Lighting Sensor> setting:

–The buttons are lit up when <AV Menu>,<Source Menu>, or <Open/Tilt> is displayed.

–The screen is turned on when a call/Text message comes in (for Bluetooth mobile phone).

–The screen is turned on when the signal from the rear view camera comes in.To change the sensitivity of the sensor, see “Motion Sensitiv.” ( 34)

8