Menu item

Selectable setting/item

Initial: Underlined

 

 

 

 

 

Ring Mode

♦ In Unit: Selects the ring tone set on the unit.

 

 

♦ In Phone

: Selects the ring tone set on the mobile phone. (This

 

 

 

function may not work depending on the mobile

 

 

 

phone.)

 

 

 

 

 

Ring Tone Change

When <Ring Mode> is set to <In Unit>, you can select the ring tone for

 

 

received calls and Text message from Tone1, Tone2, Tone3.

Settings

Initialize

♦ Call Tone: Selects the ring tone for phone calls.

Hold [Enter] to initialize all settings you have made in <Bluetooth>

 

 

♦ Message Tone: Selects the ring tone for Text message.

 

 

menu.

 

 

 

 

 

 

 

InformationThe following information is shown:

 

 

 

♦ Name: The unit name

 

 

 

♦ Address

: The Mac address of the unit

 

 

 

♦ Version: The Bluetooth software

 

 

 

♦ Phone Device/

: The connected device names

 

 

 

Audio Device

 

 

 

 

 

 

 

Bluetooth operations for KW-ADV793/KW-AVX730

ENGLISH

For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200: separately purchased) to the expansion port on the rear.

•Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.

•Refer to pages iii and iv at the end of manual to check the countries where may use the Bluetooth® function.

To use a Bluetooth device through the unit (“BT Phone” and “BT Audio”) for the first time, you need to establish Bluetooth wireless connection between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset your unit. Up to 5 devices can be registered in total.

•Only one device can be connected at a time for each source (“BT Phone” and “BT Audio”).

KW-ADV793 KW-AVX730Connecting Bluetooth devices Connecting a new Bluetooth deviceRegistration (Pairing) methods

Use either of the following items in <Bluetooth> menu to register and establish the connection with a device.

•Select “BT Phone” or “BT Audio” as the source to operate <Bluetooth> menu. (10)

Open

Make the unit ready to establish a new

 

Bluetooth connection. The connection

 

is established by operating the

 

Bluetooth device.

 

 

Search

Make the unit ready to establish a new

 

Bluetooth connection. The connection

 

is established by operating this unit.

 

 

Continued on the next page

45