1. Introduction (continued)
Cautionary notes for the correct usage of this product
•Before recording an important event, etc., always check to make sure that this product is working properly.
•We are not liable for any missed recordings caused by malfunction of this unit, etc.
Phenomena unique to CCD
•Smearing and blooming
When using CCD to record a bright light source, a smearing effect may occur running a white line vertical to the light source. In addition, a blooming effect may also occur when the light source is extremely bright, spreading light to the source surroundings.
•Line distortion
Line and patterns may appear distorted when recorded.
•White spots
White spots may appear on the screen when operating under high temperatures. Always use the product under recommended ambient temperatures.
White spots may also appear at a slow shutter speed setting (1/8 s or higher).
To reduce this phenomenon, this product is provided with at
Cautionary notes
•Influence of strong electric waves and magnets
Screen noise and discolouration may occur when using the product near antennas of ra- dios and televisions or near transformers, monitors, etc. with strong magnetic force.
•Compatible lenses ( page E15 Mounting and setting the lens)
Although the lens mount of this product is a type C mount, take caution as there are restric- tions on the lenses that can be used.
This product is not equipped with a
•To save electricity, turn off the system when not in use.
•Do not leave the product where it is subject to radiation or
Cleaning
When clean the equipment please use dry cleaning cloth or wet cleaning cloth with small amount of alcohol.
Do not spill any liquid into
E6
