JVC KY-F75 manual Connecting the AC adapter, E16, DC cable 2 m

2. Preparations (continued)

Connecting the AC adapter

It is possible to supply power to the KY-F75 from the computer via the IEEE1394 cable, but when a motorized lens, etc., is used, the DC cable should be used to connect the KY-F75’s [DC IN] connector and the [TO CAMERA] connector on the AC adapter (AA-P700).

AA-P700	AC adapter (separately sold)
	DC 12V=OUTPUT
		VIDEO OUTPUT
AC 100V		LENS
		IEEE1394
		REMOTE
	S(Y/C) OUTPUT	TO CAMERA
	EITHER	DC IN
		SEE INST-
	OUTPUT	RUCTION
	MAX 1.25A	MANUAL

		POWER
White marking	TO CAMERA	SEE INSTRUCTION MANUAL
	connector
		DC IN connector

Connect the end with the		Clamp filter
white marking to the AC	DC cable (2 m)	(supplied)
adapter	(separately sold)

CAUTION

•Be sure to use the AA-P700 AC adapter.

Make sure that the power switch on the AA-P700 AC adapter is set to OFF before connections are made. Making connections while the power is ON could result in damage to the KY-F75.

Connecting the DC power cable and attaching the filter clamp

Clamp filter

DC IN

POWER

Ring

Plug

DC IN

DC IN

●After inserting the plug completely, tighten the se- curing ring

●To reduce the emission of unwanted radio waves, make sure to attach the provided clamp filter as shown in the figure on the left. Wind the cable once around the clamp filter.

●Attach the clamp filter as close as possible to the KY-F75 as shown in the figure.

E16