JVC KY-F75 manual Freezing the image, When an external trigger device is connected, E22

3. Recording (continued)

Freezing the image

Live image is shown on the monitor at a rate of 7.5 frames per second.

The following describes the procedure for freezing a required image. (Still image displayed)

Tool bar

[Freeze/Cancel] button

Living image

1.

2.

The image is frozen when the [Freeze/Cancel] button is clicked. (Still image displayed)

To stop display of the frozen image, click the Freeze button again.

When an external trigger device is connected

The frozen image can be turned ON/OFF by the trigger input through the [REMOTE] connector on the KY-F75.

Interlocking with the flash

When a flash is connected to the [REMOTE] connector on the KY-F75, the flash can be made to fire in synch with KY-LINK freeze operation or the external trigger input. (  page E43) However, in the following case, the flash will fire irrespective of the trigger.

●During auto white balance operation

●When one or more of the functions auto iris, EEI, and ALC is/are used

MEMO

The freeze function of the KY-F75 is accomplished in the memory of the computer by stopping the output of the camera image. Accordingly, if the trigger is input to the camera while the live-window is not shown, an image will not appear even if the live-window is displayed.

E22