Filename [DR-MH30EU_07Timer Recording.fm]
Masterpage:Left0
44 EN
Page 44 Tuesday, 15 June 2004 10:13
TIMER RECORDING
You can programme this unit to timer-record as many as
32 programmes.
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the SHOWVIEW number.
1Load a recordable disc if recording to DVD.
2Press PROGRAMME to access the programme top screen.
3Press rtw e to select “SHOWVIEW”, then press ENTER.
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMES” appears on the TV screen, you need to cancel
some of the reserved programmes. (墌pg.47)
4Press the number keys to
enter the SHOWVIEW number of a
programme you wish to record.

OR

Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all needed
numbers.
5Press rt to select “RECORD TO”, then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6Press rtw e to select “CONFIRM”, then press ENTER.
●If the number you entered is invalid, “SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV
screen. Input a valid SHOWVIEW number.
●If “GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAM
THEN RETRY” appears on the TV screen, set Guide Program
Numbers manually. (墌pg.70)
7The SHOWVIEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
●To cancel this setting, press RETURN.
8Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
●“INPUT TITLE” (墌pg. 50, “Modify Title Name”)
●“CATEGORY” (墌pg.51, “Modify Category”)
●“VPS/PDC” (墌pg. 45, “VPS/PDC Recording”)
●“WEEKLY/DAILY” (墌pg.45, “Weekly/Daily Recording”)
●“REC MODE” (墌pg. 35, “Recording Mode”)
9Press rt to select “OK”, then press ENTER to access the
Programme Confirmation screen.
10 Press we to select “EXIT”, then press ENTER to complete
timer programming.
●To programme another timer, press we to select “CONTINUE”, then
press ENTER.
●If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 47.
NOTES:
●There may be cases that SHOWVIEW Timer Programming function
prolongs the stop time of the programming.
●When two successive programmes are recorded on a DVD-RW disc
with SHOWVIEW Timer Programming function, the beginning of the
second one may be left off the recording.
●If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
SHOWVIEWTM Timer Programming
●Make sure that the unit’s built-in clock is set properly.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
PROGRAMME
DISPLAY
CLEAR
0 – 9
VPS/PDC#
RETURN
ENTER
CANCEL
CABLE/SAT
DVDTV
PROGRAMME > SHOWVIEW (1/2)
SHOWVIEW NO.
PRESS [PROGRAMME]
TO EXIT
SELECT WITH [ ]
THEN PRESS [ENTER]
CONFIRM
RECORD TO
1234
12
456
789
0
DELETE
DELETE ALL
DVD
ENTER
SELECT
EXIT
PROGRAMME
3
1
2
3
1
2
2
3
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “SHOWVIEWTM System Setup” (墌pg. 70) and set
the Guide Program number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the SHOWVIEW programme screen in step 7. When
this happens, set the correct Guide Program number for that station.
(墌pg.70, “SHOWVIEWTM System Setup”)
Satellite Receiver Users
To timer-record a satellite broadcast using the SHOWVIEW
system:
APerform “Satellite Receiver Control Setting” (墌pg.23).
BPerform “SHOWVIEWTM Timer Programming” (墌pg. 44).
CLeave the satellite receiver’s power on.
DR-MH30EU_07Timer Recording.fm Page 44 Tuesday, June 15, 2004 10:19 AM