Filename [DR-MH30EU_09Editing.fm]
Masterpage:Left+
60 EN EDITING
Page 60 Friday, 11 June 2004 21:53
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
1Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
AWhen using your unit as the source player:
—connect its L-1 IN/OUT connector to the recording deck.
BWhen using your unit as the recording deck:
—connect its L-2 IN/DECODER connector to the source
player.
●If another recorder is compatible with the Y/C signal:
—when using your unit as the source player, set “L-1 OUTPUT” to
“SCART S-VIDEO”. (墌pg. 61)
—when using your unit as the recording deck, set “L-2 SELECT” to
“S-VIDEO”. (墌pg. 61)
2When using this unit as the recording deck, press HDD or DVD
to select the recording deck.
3When using this unit as the recording deck, press PR +/– to
select “L-2”.
●Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. (墌pg. 61)
4When using this unit as the recording deck, press REC MODE
repeatedly to set the recording mode.
5Engage the Play mode of the source player.
6Engage the Record mode of the recording deck.
7Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
●All necessary cables can be obtained from your dealer.
●For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
●When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (墌pg.69 )
●If you are using another recorder with S-Video and Audio output
connectors, connect its S-Video and Audio output connectors to this
unit’s S-VIDEO and AUDIO input connectors on the front panel.
Then, set the unit’s input mode to “F-1” in step3, and set “F-1 INPUT”
to “S-VIDEO”. (墌pg.62)
Edit To Or From Another Recorder21-pin SCART cable
(provided)
Recorder
Your unit
Another recorder
Player
TV receiver
21-pin SCART cable
(not provided)
AWhen using your unit as the source player:
21-pin SCART cable
(not provided)
Recorder Your unit
Another recorder
Player
TV receiver
21-pin SCART cable
(provided)
BWhen using your unit as the recording deck:
●Slide the TV/CABLE/SAT/DVD switch to DVD.
DR-MH30EU_00.book Page 60 Monday, June 14, 2004 8:03 AM