48 EN TIMER RECORDING

 

 

Automatic Satellite Programme

 

DECODER connector.

 

 

 

 

Make sure the satellite receiver is connected to the unit’s L-2 IN/

 

 

Recording

 

Programme the timer on the satellite receiver.

 

 

 

Slide the TV/CABLE/SAT/DVD switch to DVD.

 

 

 

 

1 Press HDD or DVD to choose the recording deck.

This function allows you to automatically record a satellite

 

programme which is timer-programmed on your external satellite

 

2 Set “L-2 SELECT” to “SAT VIDEO” or “SAT S-VIDEO”.

receiver. Connect a satellite receiver to the unit’s L-2 IN/

 

 

( pg. 61)

DECODER connector and programme the timer on the satellite

 

 

Also refer to “IMPORTANT” on page 65.

receiver. The unit starts or stops recording by the signals input

 

 

3 Press REC MODE repeatedly to set the recording mode.

from the satellite receiver. After recording, the unit’s power shuts

 

off automatically.

#

 

 

 

 

4 Press and hold SAT for about 2 seconds to engage the

 

 

 

 

Automatic Satellite Programme Recording mode. “SAT#” appears

ATTENTION:

 

on the front display panel.

Be sure not to turn on the satellite receiver before the programme

 

NOTES:

 

 

is executed; otherwise, the unit will start recording when the

 

 

 

 

To disengage the Automatic Satellite Programme Recording mode,

 

 

satellite receiver’s power is turned on.

 

 

 

 

press SAT#.

If you have connected another appliance other than a satellite

 

 

If the unit’s power is off, it is not possible to engage the Automatic

 

 

receiver to the L-2 IN/DECODER connector, be sure not to engage

 

 

 

 

Satellite Programme Recording mode.

 

 

the Automatic Satellite Programme Recording mode; otherwise,

 

 

 

 

In step 4, if “SAT#” blinks quickly on the front display panel even

 

 

the unit will start recording when the connected appliance’s power

 

 

 

 

though your satellite receiver’s power is off, Automatic Satellite

 

 

is turned on.

 

 

 

 

Programme Recording will not work properly with that satellite

Automatic Satellite Programme Recording and timer-recording

 

 

receiver*. If this is the case, perform “Manual Timer Programming”

 

 

cannot be done at the same time.

 

 

 

 

( pg. 46) to timer-record a satellite programme.

 

 

 

 

 

 

HDD DVD

 

* Some satellite receivers output signals even if the power is off.

 

 

 

Automatic Satellite Programme Recording is not possible with those

 

 

 

 

 

 

 

 

satellite receivers.

CABLE/SAT

TVDVD

HDD DVD

“SAT#” blinks on the front display panel while Automatic Satellite Programme Recording is in progress.

For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer.

Pressing the unit’s 1 button while Automatic Satellite Programme Recording is in progress turns off the unit’s power and disengages the Automatic Satellite Programme Recording mode.

If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different recording modes for each programme.

Depending on the type of satellite receiver, the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the unit will not start Automatic Satellite Programme Recording even though “SAT#” blinks on the front display panel. When the satellite receiver shuts off once and is turned back on again, the unit starts recording.

You can also record a programme from your cable system in the same way if the system has a timer.

Just Clock ( pg. 73) does not work when the Automatic Satellite Programme Recording mode is engaged.

REC MODE

SAT#

Page 48
Image 48
JVC LPT0923-001A manual Recording, Press HDD or DVD to choose the recording deck