Basic Operation
Viewing Live Images via Front Panel Control
This section describes the procedures for viewing live images by using the front panel of
[Live] Screen
Displaying the [Live] Screen
1 Press the [LIVE/BROWSE] button when the wallpaper *1 or main menu *2 screen is displayed.
●Press the [LIVE/BROWSE] button when the [Browse] screen is displayed.
●Press the button to toggle between the [Live] and [Browse] screens.
*1 Wallpaper Screen | *2 Main Menu Screen |
Select a View
For details on the view settings, refer to [INSTRUCRTIONS].
1 Press the [PTZ/PRESET] button to switch the [PTZ/PRESET] indicator to the blinking mode
●Press the [PTZ/PRESET] button to switch the [PTZ/ PRESET] indicator between the lit and blinking modes.
2 Press the [15/ZOOM IN] and [14/ZOOM OUT] buttons to select a view
Note :
●Do not switch the view frequently within a short time interval.
●When live images do not appear on
●The audio setting is set to ANo Audio SourcesB when you return from the setting screen to [Live]. Select the audio parameters again.
Select a Camera
Select the camera image that you want to view as follows.
1 Press the [SELECT] button
●The [SELECT] indicator lights up.
2 Enter the camera number using the [1] to [16] keypad
●When you have selected a camera, the blue bar at the top of each live image changes to a lighter blue tone.
●Each bar comes with a
A
B
C
D
[Live] Screen
16