Selecting a Language
The [Language Setting] screen appears when you start up
1 Select a language
●Use the [2/D] or [10/0/E] button to select a language.
2 Use the [SKIP] button to select [OK], followed by pressing the [16/ENTER] button
●The AThe system is being set up.B message may appear depending on the setting, and the system is automatically rebooted.
Memo :
●Selecting [OK] changes the color of the [OK] characters from brown to orange.
Automatic Registration of Cameras
After you have started up
1 Check to ensure that [Auto Detect] is selected, followed by pressing the [16/ENTER] button
●The APlease wait...B message appears.
Memo :
●The characters of the selected item switches to orange color.
2 Check to ensure that the camera is detected
●After the message disappears, a list of detected cameras is displayed.
●If all the cameras are not detected, press the [Auto Detect] button again. If doing so does not solve the problem, check the connection with the cameras and the IP address of the cameras.
Memo :
●Devices other than the cameras may appear in the list. Uncheck the boxes of these devices.
3 Swap the order of detected cameras
●Select SORT button using [SKIP] button and press [16/ENTER] button. The order of detected cameras can be sorted.
●The different types of sort buttons include the [IP], [MAC], [CH], [MAKER], and [MODEL] sort buttons.
●Select list using [SKIP] button to select [2/D], [10/0/E].
After selecting camera, press [SKIP]] button to select [Up], [Down]. When [16/ENTER] is pressed, the order
of cameras will be swapped.
●Deselect the check box of any camera that you are not using.
Memo :
●The camera in the upper position of list order has the first priority. Camera number will be registered in the list order.
4 Use the [SKIP] button to select [Entry], followed by pressing the [16/ENTER] button
●The camera that is automatically detected is registered in the system.
13