JVC LT-17X475 Watch images from external equipment, Displaying the source information, PC mode

Adjust the volume

Press the VOLUME buttons to adjust the volume. The volume indicator appears and the volume changes as

you press the VOLUME buttons.

Muting the sound

Press the muting button to turn off the sound.

Pressing the muting button again restores the previous volume level.

Watch images from external equipment

Use the INPUT button:

Press the INPUT button to choose an VIDEO terminal.

TV mode		EXT modes
Last
Programme			VIDEO-1
number
	PC
		PC		VIDEO-2

Remote control buttons and function

Displaying the source information

You can display the source information on the screen.

Press the DISPLAY button to display the source information.

Pressing the DISPLAY button changes the display as follows:

	01
	STEREO
or	TV
	No Display
	VIDEO-1

EXT

Signal source

•The source information switched by DISPLAY button.

•The source type : TV/VIDEO-1/VIDEO-2/PC

ENGLISH

In the PC mode:

If following message appears, the power lamp blinks in amber and the TV goes in to reduced power mode.

-"NO SIGNAL"

-"CABLE NO INSERT"

-"OUT OF RANGE"

See "Troubleshooting" on page 25 for detials of this messages.

MTS (Muti-Channel Television Sound)

MTS technology allows severial audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program(SAP).

Press MTS button to switch STEREO/SAP/MONO.

•Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only.

•Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

•Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

•MTS unavailable if your television's input source is in VIDEO-1, VIDEO-2.

11