Set Lock Code

INITIAL SETUP

Note:

If you want to change the setup, move the cursor to the top column and change the lock icon to " - " by pressing or again. You may then select indivual categories to block.

Movies Ratings :

•NR - Not Rated

This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn't intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children's programming, foreign programs, or adult material.

•G - General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age.

•PG - Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence, some brief nudity, and strong language. The contents are not deemed intense.

•PG -13 - Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may include more explicit sexual, language, and violence content than movies rated PG.

•R - Restricted

These films contain material that is explicit in nature and is not recommended for unsupervised children under the age of 17.

•NC-17 - No One Under 17

These movies contain content which most parents would feel is too adult for their children to view. Content can consist of strong language, nudity, violence, and suggestive or explicit subject matter.

•X - No One Under 18

Inappropriate material for anyone under 18.

1Select SET MOVIE RATINGS and press the/ buttons to turn on or turn off the lock.

SET MOVIE RATINGS

X	NC-17	R	PG-13	PG	G	NR
_	_	_	_	_	_	_

FINISH

Channel guard and V-Chip settings are protected by a four- digit lock code. Your TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish.

1 Select SET LOCK CODE and press 0 to enter the the SET LOCK CODE setting menu.

LOCK CODE

0 0 0 0

FINISH

2Press the / buttons to move to the next digit and press the / to select the number. Then move to FINISH and press OK to save settings and exit.