Setting up your TV

Putting the batteries into the Remote control

Use two AA/R6 dry cell batteries.

Insert the batteries from the - end, making sure the + and - polarities are correct.

ENGLISH

Follow the warnings printed on the batteries.

Battery life is about six months to one year, depending on your frequency of use.

The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.

If the remote control does not work properly, replace the batteries.

Remove the terminal cover

There are connection terminals behind the covers of the rear of the TV. Remove the cover before connecting a DVD or VCR.

The covers can be removed by removing the hook at the top and then pulling out while lifting slightly. To replace the covers, first connect the hook at the bottom of the cover to the TV and then insert the hook at the top.

Leave the covers off if they do not fit properly. Do not force to replace the covers. Doing so may cause damages of the connection cables and the covers.

Leave these covers off when mounting the TV on a wall.

100mm mount based on VESA regulation is equipped. As for the wall mounting unit, please consult your dealer.

The handle and the stand can be left by loosing the screws with a screwdriver when mounting the TV on a wall.

Spread a soft cloth on a flat table and then place the TV on the cloth with the screen facing downwards when you leave the handle and the stand.

7

Page 8
Image 8
JVC LT-17X475, LT-23X475 manual Putting the batteries into the Remote control, Remove the terminal cover