Preparation

Install Display on solid horizontal surface such as a table or desk.

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Features

It is a remote controlled colour television and PC monitor.

100 programmes from VHF, UHF bands or cable channels can be preset.

It can tune cable channels.

Controlling the TV is very easy by its menu driven system.

It has 2 pieces of Euroconnector socket for external devices (such as video, video games, audio set, etc.)

To use as a PC monitor, 15 Pin Mini D-Sub connector for computer.

Optional stereo sound systems (German or German+Nicam) are available.

Multilanguage OSD.

Teletext (Fastext, 7 pages).

It is possible to connect headphone.

A.P.S. (Automatic programming system)

All programmes can be named.

Forward or backward automatic tuning.

Sleep timer.

Child lock

Auto, 4:3, 16:9

Automatic sound mute when no transmis- sion.

When no valid signal is detected, after 5 min-

utes the TV switches itself automatically to stand-by mode.

NTSC Playback.

Universal power supply range is a standard feature on this model.

TV Picture in PC (if PC input available).

PLL (Channel Search)

PC input (Support Up to 1024 x 768)

Panel Features

High resolution (800 x 600), 20” TFT LCD display.

High contrast ratio (500:1 Typical)

Brightness: 500 cd/m2.

High-speed response time < 16 msec.

Wide viewing angle (typical) 160° (horizon- tal) and 120° (vertical).

8-bit colour depth, display 16.7 M colours.

Before Switching on your TV

Power connection

Only use the adaptor supplied with this prod- uct.

IMPORTANT: The TV set is designed to oper- ate on 12 V DC. For this, an adaptor is used which gives 12V DC voltage. Connect this adaptor to a system that supplies 100 -240V AC, 50/60 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you con- nect the set to the mains.

Connections to the RF input socket

Connect the aerial or cable TV plug to the RF input socket located at the back of the TV and connect the cable plug coming out from

ENGLISH - 9 -

Page 42
Image 42
JVC LT-20E50SJ manual Preparation