JVC LT-20E50SJ manual Sound Menu

Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the screen.
If the menu is removed, the effect of this function is seen. At
normal broadcasting, Noise Reduction changings are effec-
tive at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
				Setting Bass Level
Setting Hue
During Playback NTSC system, this will ap-				• Using “		“ or “ ” button select Bass Level.
pear in AV mode only when NTSC video source				• Press “ ” button to increase bass level.
is applied. Otherwise, Hue option is invisible
				• Press “		“	button to decrease bass level.
in Picture menu in TV mode :
• Using “	“ or “	” button select Hue.		Setting Treble Level
• Press “	” button to increase hue level.			• Using “		“ or “ ” button select Treble.
• Press “ “ button to decrease hue level.				• Press	“	” button to increase treble level.
Center value is indicated with one arrow.				• Press “		“	button to decrease treble level
Reset				Setting Balance
Press BLUE button to reset the picture modes				It allows adjusting the distribution between the
to factory default settings.				left and right speakers.
To Store the Settings				• Using “		“ or “ ” button select Balance.
In the Picture Menu, all settings are stored				• Press “ ” button to change balance right-
automatically.				ward.
Sound Menu				• Press “ “ button to change balance leftward.
To change sound settings				Hyper Sound
As you enter the main menu, sound will be				• Using “		“ or “ ” button select Hyper Sound
the second item. In the main menu, select				• Pressing “			“ or “ ”	button will turn on or off
Sound using “		“ or “ ” button, then enter
				this feature.
the sound menu pressing “ “ / “ ” or “OK”
				Pseudo/spatial effect can be turned on or off
button.
				via the Hyper Sound item in the Sound menu
Setting Volume
				or by remote control. In Mono transmission
As you enter the sound menu, Volume will be				the left and right channels will be added at left
				channel and dummy stereo effect will intro-
the first selected option.
				duced to end-user.
• Press “ ” button to increase volume.
				In stereo transmission it yields a phase differ-
• Press “ “ button to decrease volume.				ence between left and right channels. Hyper
Or you can directly change the volume set-				Sound selection will be displayed on the
				screen when the TV Status button is pressed
tings using “		+” (to increase) or “-	” (to
				or programme is changed.
decrease) button.
				Selecting Sound Mode
				• Using	“		“ or “	” button select Sound
				Mode.
		ENGLISH - 15 -