Customizing your TV
Picture Adjust
Natural Cinema
Allows you to compensate for image blurring when the original video you are watching was shot at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion process is known as “TELECINE”. Auto / On / Off
Notes:
•When you are receiving a 480p, 720p, 1080p signal, or in PC mode, Natural Cinema cannot be selected.
•Natural Cinema is only applied for SD 480i and HD 1080i signals.
Theater Pro II
It is possible to use Theater Pro II menu only when the Video Status mode is set to Theater,
Theater Pro II Menu | Settings |
DSD Detail | Shows the edge of the picture clearly |
H.Sharp | Emphasizes the edge of the picture horizontally |
V.Sharp | Emphasizes the edge of the picture vertically |
DSD Noise Control | Reduces picture noise |
Color Temp. | Adjusts the screen (red, blue or green) color |
(High, Low) |
|
Color Balance | Adjust the blue color naturally |
*Color Mngmt. | Select a corrected color |
(Red, Yellow, Green, Cyan) Axis |
|
*Color Mngmt. | Adjusts the tints of (red, yellow, green or cyan) |
(Red, Yellow, Green, Cyan) Tint |
|
*Color Mngmt. | Adjusts the color of (red, yellow, green or cyan) |
(Red, Yellow, Green, Cyan) Color |
|
*Color:Bright Area | Adjusts the picture color of the bright areas |
*Color:Dark Area | Adjusts the picture color of the dark areas |
|
|
*These Theater Pro II menus cannot be selected when Color Management is OFF. See page 36.
–Reset
Resets all Theater Pro II menu picture adjustments.
x.v.Color
This makes full use of the display’s capabilities to produce the perception of
x.v.Color and 
are trademarks.
Color Temp
Allows you to adjust colors to look as accurate as possible.
High - Creates a slightly cooler looking image
Low - Creates a slightly warmer looking image
35
