JVC LT-52X899 manual Precautions, Tidying the cables, Install your TV, Disconnecting the stand

Precautions

Tidying the cables

A cable holder which keeps your connection cables tidy is attached to the back of the stand.

Install your TV

To prevent the TV from falling, thread the belt through the hole on the back of the standand secure it to the TV rack.

Hole

Belt and screw (not included)

Disconnecting the stand

1)Place the TV face down on a soft cloth on a table.

2)Remove the five screws from the back of the TV.

3)Pull out the stand from the TV.

Notes:

*In the case of placing the 52” TV on the wall, please follow the next steps.

1)Remove the TV base from the upper body of the stand.

2)Attach the upper stand body to the TV.

•To re-install the stand, reverse the procedure from 3) to 1).

•If you find it difficult to remove the screws from inset screw wells, use a magnetized screwdriver.

8