Continued
English
Recording a CD
When recording a CD onto an MD, you can record the entire CD or the particular tracks manually and using the synchronized recording.
Recording a CD Manually
You can start recording an entire CD or any tracks of a CD while listening.
1 Insert a recordable MD into the MD loading slot.
The MD IN lamp lights orange.
2 Prepare a CD.
•Place a CD on the disc tray, press 6 (play/pause) button on the CD player or CD 6 (play/pause) on the remote control, then press 7(stop) button before going to the next step.
•You can also record programed tracks if you want (refer to
3 Press REC PAUSE button on the MD recorder.
The REC indicator on the MD recorder lights red.
4 Press 6(play/pause) button on the CD player or CD 6(play/pause) button on the remote control.
Recording starts automatically, and information changes in the display window as follows:
CD Track number
Remaining time of each track
Recording a CD — Synchronized Recording
This is the easiest way of CD recording. Setting the recording mode, you can start playing back an entire CD and recording it onto an MD simultaneously.
1 Repeat the steps 1 and 2 in previous section.
2 Press REC MODE button behind the sliding panel to select “SYNC REC >MD.”
Each time you press the button, the recording mode changes as follows:
SYNC REC |
| SYNC REC |
> MD |
| > TAPE |
(canceled)
3 Press SET button to start recording.
Recording starts automatically, and information change in the display window as follows:
CD Track number
Remaining time of each track
Remaining time for recording
Each time you press DISPLAY/CHARA. button,
information switches between the remaining time and elapsed time with the current track number alternately.
While synchronized recording
You cannot use pause function until the recording finishes.
Remaining time for recording
• To stop recording temporarily, press REC PAUSE | 4 Press 7(stop) button (on either the CD player or | |
the MD recorder) to quit recording as required. | ||
button or 6(play/pause) button on the MD recorder | ||
“WRITING” appears in the display window, and you | ||
or MD 6(play/pause) button on the remote control. | can remove the MD by pressing 0(eject) button. | |
• To resume recording, press 6(play/pause) button | ||
• When all the tracks finished recording, CD player | ||
on the MD recorder or MD 6 (play/pause) button | and MD recorder will automatically stop. | |
on the remote control again. |
| |
5 Press 7(stop) button to stop recording as required. | To record a single track during playback | |
Press REC MODE button to set “SYNC REC>MD” | ||
“WRITING” appears in the display window, and you | mode, you can record a current track during playback. | |
can remove the MD by pressing 0(eject) button. | The playback of the current track is stopped, and the | |
| same track starts playing back from the beginning | |
| again. At the same time, the MD recorder starts | |
| recording the current track. | |
| • When the current track is recorded, both CD player | |
| and MD recorder automatically stop. | |
|
|
14