English
Continued
Recording the External Equipment
When recording from the external equipment, you can select one of the two recording methods — Manual Recording and Sound Synchronized Recording.
•Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the external equipment respectively.
•Sound Synchronized Recording — With this method, you can start recording when the sound signals come into the MD recorder (sound is recorded in stereo).
Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds.
If Sound Synchronized Recording will not work correctly
Use the Manual Recording. Sound Synchronized Recording starts automatically when the MD recorder detects sound signals come in. If sound signal is too weak for this unit to detect, Sound Synchronized Recording will not start (or will stop even while the source is being played).
Recording the External Equipment Manually
First of all, make sure the proper cable connections between
1 Insert a recordable MD.
The MD IN lamp lights orange.
2 Press AUX button to select either analog source or digital source according to the external equipment.
Each time you press AUX button, AUX mode changes between “AUX” and “AUX DIGITAL” alternately.
AUX 
AUX DIGITAL
3 Press REC PAUSE button on the MD recorder.
The REC indicator on the MD recorder lights red, and the MD recorder switches to the
4 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control.
Selected source and remaining time for recording appear in the display window as follows:
or
5 Make the external equipment start playback in succession.
•To stop recording temporarily, press REC PAUSE button or 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control.
•To resume recording, press 6(play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again.
Each time you press DISPLAY/CHARA. button,
information switches between the remaining time for the MD and the elapsed time for the MD alternately.
6 Press 7 (stop) button on the MD recorder to stop recording as required.
“WRITING” appears in the display window, and you can remove the MD by pressing 0(eject) button.
17
