English
Continued
•If “TRACK PROTECTED” appears, the selected track has been
5 Press SET button when you find the point where you want to divide the track.
The MD recorder repeats the selected point — a portion of three seconds length following the dividing point.
•If you have selected a wrong track number, press CANCEL button then select the correct track.
6 Rotate MULTI JOG dial ( < / > button also available) to precisely adjust the dividing point.
•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).
JOIN Function
This function allows you to join two adjacent tracks into one track.
•To quit any time during editing process, press TITLE/ EDIT button.
1 Insert an MD you want to edit into the MD loading slot.
The MD IN lamp lights orange.
2 Press TITLE/EDIT button until “JOIN?” appears in the display window.
3 Press SET button.
4 Rotate MULTI JOG dial to select the two adjacent tracks you want to join (< / > button also available ).
5 Press SET button.
When you stop rotating MULTI JOG dial, the system repeats the newly selected dividing point.
7 When you find the right position, press SET button.
“PUSH ENTER” appears in the display window.
8 Press ENTER button to finish the editing procedures.
•If you want to cancel the editing, press CANCEL button.
9 Press 0(eject) button to eject the MD.
“WRITING” appears while the editing you have made is being recorded onto the MD.
To join the divided tracks again, see the JOIN function.
6
7
•If you have selected wrong tracks, press CANCEL button, then select the correct tracks by rotating MULTI JOG dial (< / > button also available).
•If you want to cancel the editing, press TITLE/EDIT button.
•If “TRACK PROTECTED” appears, the selected track has been
Press ENTER button to finish the editing procedures.
Press 0(eject) button to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
To divide the joined tracks, see the DIVIDE function.
21