JVC LVT0378-001A, 0200JTMMDWJSCEN manual Recording a Tape Manually, English

English

Continued

Recording a Tape	• To stop recording temporarily, press REC PAUSE
	button or 6(play/pause) button on the MD recorder
When recording from TD-UXG6 cassette deck, you can	or MD 6(play/pause) button on the remote control.
select one of the two recording methods — Manual	• To resume recording, press 6(play/pause) button
Recording (stereo) and Sound Synchronized Recording.	on the MD recorder or MD 6 (play/pause) button
	on the remote control again.

•Manual Recording — Sound is recorded in stereo (both

on the left and right audio channels). You have to operate	Each time you press DISPLAY/CHARA. button,
the MD recorder and the cassette deck respectively.	information switches between the remaining time for
	the recording and the elapsed time with the track
• Sound Synchronized Recording — With this method, you
	number of the MD alternately.
can start recording when the sound signals come into the
MD recorder (sound is recorded in stereo).	6 Press 7(stop) buttons both on the MD recorder and
Sound Synchronized Recording will stop automatically
if no sound comes in for more than 30 seconds.	the cassette deck to quit recording as required.
	“WRITING” appears in the display window, and you
If Sound Synchronized Recording will not work
	can remove the MD and the tape by pressing 0(eject)
correctly
	buttons.
Use the Manual Recording. Sound Synchronized
Recording starts automatically when the MD recorder
	Using 7 (stop) button on the remote control, you
detects sound signals come in. If sound signal is too
weak for this unit to detect, Sound Synchronized	cannot stop both the MD recorder and the
Recording will not start (or will stop even while the	cassette deck. Make sure to press each button on
source is being played).	both units.

Recording a Tape Manually

1 Insert a recordable MD into the MD loading slot.

The MD IN lamp lights orange.

2 Prepare a tape playback.

•Place a tape on the tape tray, press ` (playback) button on the cassette deck or TAPE ` (playback) button on the remote control, then press 7 (stop) button before going to the next step.

3 Press REC PAUSE button on the MD recorder.

The REC indicator on the MD recorder lights red, and the MD recorder switches to the recording-pause mode.

4 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control.

The MD recorder starts recording, and information changes in the display window and the remaining time for recording appears as follows:

5 Press ` (playback) button on the cassette deck or TAPE ` (playback) button on the remote control in succession.

Recording a Tape — Sound Synchronized Recording

Setting the recording mode, you can start playing back a tape and recording it onto an MD simultaneously.

1 Repeat the steps 1 and 2 in the previous section on this page.

2 Press REC MODE button behind the sliding panel to select a recording mode as follows:

3 Press SET button.

REC indicator on the MD recorder lights red, and information appears in the display window as follows:

15