ENGLISH
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre.
1 Select “EQ.”
EQ 
S.BASS
Canceled 
L.V.METER 
2 Select the sound mode.
The sound mode changes as follows:
FLAT
Hard Rock
R & B* 
POP
JAZZ
DanceMusic
Country 
Raggae
Classic
USER**
(back to the beginning)
*Rhythm and Blues
**If you want to adjust and store your original sound mode (USER), see “Storing your own sound adjustments” on page 27.
EQ level changes as you select the sound mode.
Ex.: When you select “R & B”
To cancel the sound mode, select “FLAT” in step 2.
Note:
You can adjust the sound mode to your preference, and store it in memory.
To store a sound mode separately for each playback source (EQ Link)
Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source. A sound mode can be stored for each of the following
•See also “Changing general settings (PSM)” on page 30.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items appears on the display.
2 Press ¢ 
or 4 
to select “EQ LINK (Equalization Link).”
3 Press + to select “LINK ON.”
4 Press SEL (select) to finish the setting.
To cancel EQ Link, repeat the same procedure and select “LINK OFF” by pressing – in step 3.
•When “EQ LINK” is set to “LINK ON” The selected sound mode and Super Bass level can be stored in memory for the current source.
Each time you select the same source, the same sound mode is also recalled, and shown after the source name.
•When “EQ LINK” is set to “LINK OFF”
The selected sound mode effect applies to all the sources selected.
26
