ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

 

 

Symptoms

Causes

 

Remedies

 

 

 

 

 

 

 

 

Sound is sometimes

Connections are not good.

Check the cords and

 

 

 

 

 

interrupted.

 

connections.

 

 

 

 

 

 

 

 

Sound cannot be heard

The volume control is turned

Adjust it to the optimum level.

General

 

 

from the speakers.

to the minimum level.

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

 

 

 

 

connections.

 

 

 

 

 

 

 

 

This unit does not work at

The built-in microcomputer

Press the reset button on the

 

 

 

all.

may have functioned

front panel (see page 2.)

 

 

 

 

incorrectly due to noise, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SSM (Strong-station

Signals are too weak.

Store stations manually.

 

 

FM/AM

 

 

Sequential Memory)

 

 

 

 

 

automatic preset does not

 

 

 

 

 

 

 

 

 

 

 

 

work.

 

 

 

 

 

 

 

 

 

 

 

Static noise while listening

The aerial is not connected

Connect the aerial firmly.

 

 

 

to the radio.

firmly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc cannot be played back.

Disc is inserted upside down.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

 

Disc sound is sometimes

You are driving on rough

Stop disc play while driving on

 

 

 

interrupted.

roads.

rough roads.

 

 

 

 

 

 

 

 

 

 

Disc is scratched.

Change the disc.

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

connections.

 

 

 

 

 

 

 

 

“NO DISC” appears on the

No disc is in the loading slot

Insert a disc into the loading

Playback

 

 

display.

(or in the magazine.)

slot.

 

 

 

 

 

 

 

 

 

Disc is inserted incorrectly.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

 

Disc

 

Disc can neither be played

The CD player may be

Press and hold both the

 

 

back nor ejected.

functioning incorrectly.

 

/ ATT and CD 0 buttons at

 

 

 

 

 

 

 

 

 

the same time for several

 

 

 

 

 

seconds.

 

 

 

 

 

 

 

 

“EJECT ERR” appears on

The disc was interrupted

Press CD 0, or press both the

 

 

 

the display.

ejection or insertion.

 

/ ATT and CD 0 buttons

 

 

 

 

 

together to clear the message.

 

 

 

 

 

 

 

 

 

CD-R/CD-RW cannot be

CD-R/CD-RW is not finalized.

Insert a finalized CD-R/

 

 

 

played back.

 

 

CD-RW.

 

 

Tracks on the CD-R/CD-RW

 

Finalize the CD-R/CD-RW

 

 

 

cannot be skipped.

 

 

with the component which you

 

 

 

 

 

 

used for recording.

 

 

 

 

 

 

 

40

Page 40
Image 40
JVC LVT1099-001A manual Troubleshooting, Symptoms Causes Remedies, Disc