RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular station.
Searching for a station automatically: Auto search
1 Select the band (FM1, FM2, FM3 or AM).
FM1
FM2
FM3 
AM
Note:
This receiver has three FM bands (FM1, FM2, and FM3). You can use any one of them to listen to an FM broadcast.
Selected band appears.
2 Start searching for a station.
To search stations of higher frequencies
To search stations of lower frequencies
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have pressed for searching.
8
Searching for a station manually: Manual search
1 Select the band (FM1, FM2, FM3, or AM).
FM1
FM2
FM3 
AM
2 Press and hold ¢ 
or 4 
until “M” (manual) starts flashing on the display.
3 Tune in to a station you want while “M” is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.
