Using the Timers
Daily Timer and Sleep Timer are available.
•Before using these timers, make sure the
Using the Daily Timer
You can set the Daily Timer when the unit is either turned on or in standby mode.
How the Daily Timer actually works
When the
•Once the timer has been set, it will be activated at the same time everyday until the timer is turned off and the timer setting remains in memory until you change it.
Before you start...
When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.
On the remote control ONLY:
1 | Press TIMER SET. | TIMER SET | ||||
|
|
| ||||
|
|
| The (timer) and the ON |
|
|
|
|
|
|
|
|
| |
|
|
| flash and the |
|
|
|
|
|
| display. |
|
|
|
|
|
| If you does not need to change the | |||
|
|
| step 3. |
|
|
|
|
|
|
|
|
|
|
2 Press PROGRAM to set the | PROGRAM | ||
you want the unit to turn on. |
|
|
|
|
|
|
The hour indication starts flashing on the display.
1) Press ¢or 4to set the hour, then press PROGRAM.
2)Press ¢or 4to set the minute, then press PROGRAM.
PROGRAM
3 | TIMER SET | ||
Press TIMER SET. |
|
| |
|
The (timer) and the OFF
If you does not need to change the
•If you change the
4 | Press PROGRAM to set the | PROGRAM | ||
|
|
| ||
| you want the unit to turn off. |
|
|
|
|
|
|
|
The hour indication starts flashing on the display.
1) Press ¢or 4to set the hour, then press PROGRAM.
2)Press ¢or 4to set the minute, then press PROGRAM.
PROGRAM
5 Press TIMER SET. | TIMER SET |
|
The (timer) indicator flashes and the source name appears on the display.
If you does not need to change the source, go to step 7.
6 Press PROGRAM to select the | PROGRAM | ||
source to play. |
|
|
|
|
|
|
The source name starts flashing on the display.
• Press ¢or 4to select “CD” or “TUNER,” then
press PROGRAM.
PROGRAM
19