JVC LVT1115-003B, 0603MWMMDWORI manual Class Laser Product

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appro- priate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT:

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION— STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (all lamps

and indications go off). The STANDBY/ON button in any position does not disconnect the mains line.

•When the unit is on standby, the STANDBY lamp lights red.

•When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1CLASSIFICATION LABEL ON EXTERIOR SURFACE

CLASS 1

LASER PRODUCT

2WARNING LABEL INSIDE THE UNIT

CAUTION: Invisible	laser	ADVARSEL: Usynlig laser-		VARNING:	Osynlig	laser-		VARO: Avattaessa ja suo-
radiation when open	and	stråling ved åbning, når		strålning när	denna	del	är	jalukitus	ohitettaessa	olet
interlock failed or defeated.		sikkerhedsafbrydere	er ude	öppnad och spärren är				alttiina	näkymättömälle
AVOID DIRECT EXPOSURE		af funktion. Undgå udsæt-		urkopplad.	Betrakta		ej	lasersäteilylle. Älä		katso
TO BEAM.	(e)	telse for stråling	(d)	strålen.			(s)	säteeseen.		(f)

1.CLASS 1 LASER PRODUCT

2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user service- able parts inside the Unit; leave all servicing to qualified service personnel.

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspa- per or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1 Front:

No obstructions and open spacing.

2 Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Front view

Side view

15 cm

15 cm 1 cm 1 cm 15 cm

15 cm

10 cm

UX-H9

15 cm

UX-H9

G-1