Continued
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment |
|
|
|
During play, press CD 3/8. | CD | ||
| |||
While pausing, the elapsed playing time flashes on |
|
|
|
|
|
| |
|
|
| |
the display. |
|
|
|
To resume playing, press CD 3/8 again.
3 Press ¢ or 4 to select the track number, then press PROGRAM.
Track number Program step number
PROGRAM
To go to another track
Before or during play, press ¢ or
4repeatedly.
•¢ : Skips to the beginning of the next or succeeding tracks.
•4 : Goes back to the beginning of the current or previous tracks.
To locate a particular point in a track
During play, press and hold ¢ or
4.
• ¢ :
•4 :
Programming the Track Playing Order
You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks.
4 Repeat step 3 to program other tracks you want.
5 Press CD 3/8. | CD |
|
The tracks are played in the order you have programed.
If you try to program a 61st track
“FULL” will appear on the display.
To stop playing, press 7.
To check the program contents
Press PROGRAM repeatedly in stop mode. | PROGRAM | ||
The program number and track number are |
|
|
|
displayed in succession. |
|
|
|
On the remote control ONLY:
1 Place a disc.
• If the current source is not the CD player, press CD.
2 Press PROGRAM. | PROGRAM |
|
The PROG (program) indicator starts flashing on the display.
•If a program has been stored in memory, the program is called up.
To modify the program
Press PROGRAM repeatedly in stop mode to select PROGRAM the number which you want to change the track, then repeat step 3 above.
To clear the program
Press 7 in stop mode.
The PROG indicator disappears from the display.
•Pressing 0 OPEN to open the disc cover will also erase the programed tracks.
14