ENGLISH | To select the font type used on the | ||
| |||
| You can select either of the two fonts (1 or 2). | ||
| To turn the tag display on or | ||
| An MP3 and WMA track can contain track | ||
| information called “Tag” where its album | ||
| name, performer, track title, etc. are recorded. | ||
| • On: | Shows the Tag display while playing | |
|
| MP3 or WMA tracks. | |
| • Off: | Cancels the Tag display. Only the | |
|
| folder name and track name appear. | |
For MP3 tracks only: There are two versions– ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). When both ID3v1 and ID3v2 are recorded, ID3v2 will be shown.
To select the audio level
You can select the level meter.
•To show the level meter, press DISP repeatedly.
•Meter 1:
•Meter 2:
•Meter 3:
To show or delete the key icon boundary on the touch
Key icons have their own boundaries on the touch panel to make the operations easy. These boundaries can be shown or deleted according to your preference.
•On: To show the key icon boundary.
•Off: To delete the key icon boundary.
Though “Off” is selected, the key icon boundary will be shown while you are operating the touch panel. About 5 seconds after the operation, it goes off.
To change the FM tuner selectivity
In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.
•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)
•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.
To change the voice support system
You can select either “Beep” or “Voice” for the voice support system (VSS).
•Voice: Guidance is announced in the language you have selected (see “To select the language for the VSS
•Beep: A Beep sounds when you operate the unit.
To deactivate the VSS, select “Off” for “VSS
Level” (see page 31).
30