ENGLISH
Basic Operations
General
•The clock in the “BACK” icon on the screen works as the time countdown indicator. If no operation is done for a certain period of time, the current screen goes off, and the source operation screen resumes.
Selecting the source
•If a disc is not loaded, you cannot select “CD” for the playback source.
•Without connecting the CD changer, you cannot select
•To select the external component for the playback source, set the “Ext Input” setting correctly (page 31).
Turning off the power
•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
Tuner Operations
Storing stations in memory
•When SSM is carried out for a band...
–All stations previously stored for the band are erased and stations are stored newly.
–Received stations are preset in the number buttons No.1 (lowest frequency) to No.6 (highest frequency). When SSM is over, the station stored in number button 1 will be automatically tuned in.
•When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.
•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
Basic Disc Operations
General
•This unit has been designed to reproduce CDs/CD Texts, and
•The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track without the extension code <wma>.
•When a disc has been already loaded, selecting “CD” for the playback source starts disc play.
Inserting a disc
•When a disc is inserted upside down, the disc automatically ejects.
•If you keep the control panel open for about 1 minute, the control panel returns to its previous position.
Playing a disc
•While playing an audio CD: If a title has been assigned to the audio CD (see page 35), it will be shown on the display.
•While
46