JVC LVT1284-004B manual Connecting with TV, Connecting the power cord, Connecting up

Connecting up GettingConnectionstarted

Connecting with TV

TV

Main unit

To SCART connector

SCART cable (sold separately)

•In standby mode, set the RGB-Y/C selector correctly according to your TV.

•When the TV accommodates the RGB video signal, set the RGB-Y/C selector to RGB so that you can enjoy better-quality pictures.

•When the TV accommodates the S-video signal, set the RGB-Y/C selector to Y/C.

•When the TV accommodates the composite video signal only, set the RGB-Y/C selector to RGB.

CAUTION

Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing.

	TV (or
Main unit	monitor)

Connecting directly

Also, when connecting the main unit to a TV with a VCR built in, there may be picture distortion while playing.

Connecting the power cord

AC outlet

Supplied power cord Main unit

•Connect the power cord after all other connections are complete.

•The STANDBY lamp (on the front panel) will be lit.

11