JVC LVT1284-004B Changing the RDS information, Searching for programs by PTY codes PTY Search

Models: LVT1284-004B

1 47
Download 47 pages 39.98 Kb
Page 39
Image 39
Changing the RDS information

Listening to radio

Changing the RDS information

You can see RDS information on the display window on the main unit while listening to an FM station.

Press RDS DISPLAY repeatedly while listening to an FM station.

PS (Program Service):

While searching, “WAIT PS” appears and then the station names will be displayed. “NO PS” appears if no signal is sent.

PTY (Program Type):

While searching, “WAIT PTY" appears and then the type of the broadcast program will be displayed. “NO PTY” appears if no signal is sent.

RT (Radio Text):

While searching, “WAIT RT” appears and then text messages the station sends will be displayed. “NO RT” appears if no signal is sent.

NOTE

If the system takes time to show the RDS information received from a station, “PS”, “PTY” or “RT” may appear on the display window.

When PS, PTY, or RT signals appear on the display window, some special characters and marks may not be displayed correctly.

Searching for programs by PTY codes

(PTY Search)

One of the advantages of RDS is that you can locate a particular kind of program by specifying the corresponding PTY code.

The PTY Search is applicable only to the preset stations.

1 Press SEARCH when the source is FM.

2 Press PTY Searching for programs by PTY codes or PTY 1 Press SEARCH when the source is FM. repeatedly to select a PTY code while “SELECT” is flashing.

Example: when “News” is selected as a PTY code

• Refer to page 36 for the PTY codes.

3 Press SEARCH.

While searching, “SEARCH” and the selected PTY codes will be displayed.

Example: when “News” is selected as a PTY code

The system searches 30 preset FM stations, and stops when it finds the one you have selected. At this time the selected frequency and PTY code flash. When “SEARCH” is pressed while the selected frequency and PTY code are flashing, the system automatically starts to find the next station. After the frequency and PTY code stop flashing or if any other operation is done, the system automatically tunes in to the station.

To stop searching, press SEARCH.

If no program is found, “NOTFOUND” appears on the display window and the system returns to the last received station.

35

Page 39
Image 39
JVC LVT1284-004B manual Changing the RDS information, Searching for programs by PTY codes PTY Search, Press SEARCH