JVC LVT1356-005A manual Basic Disc Operations, English, On the remote control ONLY 1 Place a disc

English

To stop playing, press 7.

To remove the disc, press 0 OPEN on the unit.

•If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start.

•If no disc is inserted

“NO DISC” appears on the display.

DO NOT try to open the disc cover by hand as it will be damaged.

Basic Disc Operations

While playing a disc, you can do the following operations.

To stop playing for a moment
During play, press CD 3/8.	CD
While pausing, the elapsed playing time flashes on
the display.

To resume playing, press CD 3/8 again.

To go to another track

Before or during play, press ¢ or

4repeatedly.

•¢ : Skips to the beginning of the next or succeeding tracks.

•4 : Goes back to the beginning of the current or previous tracks.

When playing back MP3 disc:

• : Skips to the first track of the next group.

• : Skips to the first track of previous group.

To locate a particular point in a track

During play, press and hold ¢ or

4.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

Programming the Track Playing Order—Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks.

On the remote control ONLY:

1 Place a disc.

• If the current source is not the CD player, press CD.

2 Press PROGRAM.

The PRGM (program) indicator starts flashing PROGRAM on the display.

•If a program has been stored in memory, the program is called up.

3 Press ¢ or 4 to select

the track number, then press PROGRAM.

Track number Program step number

PROGRAM

4 Repeat step 3 to program other tracks you want.

5 Press CD 3/8. CD

The tracks are played in the order you have programed.

If you try to program a 61st track

“FULL” will appear on the display.

To stop playing, press 7.

To check the program contents
Press PROGRAM repeatedly in stop mode.	PROGRAM
The program number and track number are
displayed in succession.

To modify the program

Press PROGRAM repeatedly in stop mode to select PROGRAM the number which you want to change the track, then repeat step 3 above.

To clear the program

Press 0 OPEN. OPEN

To exit from the program play mode

Press 7 in stop mode.

The PRGM indicator disappears from the display.

13