Do not connect the AC power cord until all other connections have been made.
To remove the speaker grilles
The speaker grilles are removable as the illustration below.
HolesProjections
Speaker grille
To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you while holding the side.
Do the same for the rest of projections one at a time.
To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.
Connecting Other Equipment
To connect an audio equipment
You can connect audio
•DO NOT connect any equipment while the power is on.
• DO NOT plug in any equipment until all connections are complete.
For playing other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX jack by using audio cords with mini plugs (not supplied).
AUX |
| |
L |
| |
R | To | |
To audio output | ||
Audio equipment | ||
| ||
OR |
| |
To audio output |
|
When the audio equipment has pin jacks for audio output: Be sure that the pin plugs of the audio cords are colored— white plugs and jacks are for left audio signals, and red ones for right audio signals.
Putting the Batteries into the Remote Control
Insert the
1
2
3
• DO NOT use an old battery together with a new one.
•DO NOT use different types of batteries together.
•DO NOT expose batteries to heat or flame.
•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.
NOW you are ready to plug in the unit.
IMPORTANT:
Be sure to check that all connections have been made before plugging in the power cord.
7
