Playing Back Tapes
Playing Back a Tape
You can play back type I tapes only.
1
If no cassette is inserted when you press TAPE ¤ ‹
“NO TAPE” appears on the display.
UP
Press PUSH OPEN.
The cassette holder opens. | PUSH OPEN |
2 Put a cassette in with the exposed part of the tape down.
To stop playing, press 7.
DOWN
4
To fast-wind to the left or to the right,
press ¢ or 4 (or UP ¢ or DOWN 4 on the unit).
The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display.
PRESET
GROUP
DOWN
PRESET
GROUP
UP
7¢
UP
PRESET
GROUP
DOWN
PRESET
GROUP
DOWN |
| UP |
4 | 7 | ¢ |
To remove the cassette, press PUSH OPEN on the unit while playback is stopped.
PUSH OPEN
3 | Close the cassette holder gently. | To play both |
| |
You can set the deck to play just one side of a tape, both sides | ||||
|
| |||
|
| once, or both sides continuously. |
| |
|
| On the remote control ONLY: |
| |
|
| Press REV.MODE (reverse mode). | REV.MODE | |
|
|
| ||
|
| • Each time you press the button, the Reverse |
| |
|
| Mode changes as follows: |
| |
•When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display.
4 Press TAPE ¤ ‹. | TAPE |
Playback starts (if the unit has been on standby, the unit automatically turns on). The tape direction indicator ( 3 or 2 ) starts flashing slowly on the display.
•Each time you press the button, the tape direction changes:
3: plays the front side.
2: plays the reverse side.
When the tape plays to the end, the deck automatically
stops if the Reverse Mode is set to 
or 
. (See “To play both
: The deck automatically stops after playing both sides of the tape. Stops when playback in the 2 directions are finished.
: The deck continues to play both sides of the tape 10 times, then stops playback automatically.
: The deck automatically stops after playing one side of the tape.
• DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.
•The use of
•This unit is not compatible with type II and type IV tapes.
14
