JVC LVT1372-003A manual General, Inserting a disc, Playing a disc/SD card, Playing a CD-R or CD-RW

ENGLISH

Disc/SD card operations

Caution for DualDisc playback

•The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non- DVD side of a DualDisc on this product may not be recommended.

General

•This receiver has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA format and MP3/WMA files recorded in an SD card.

•When a disc or an SD card has been loaded, selecting “CD” or “SD” for the playback source starts playback.

Inserting a disc

•When a disc is inserted upside down, the control panel moves down, and the disc automatically ejects from the loading slot.

•If you keep the control panel open for about 1 minute, (beeps sound when the “Beep” setting is turned “On”—see page 44) the control panel returns to its previous position.

Playing a disc/SD card

•While playing an audio CD: If a title has been assigned to the audio CD (see page 46), it will be shown on the display.

•While fast-forwarding or reversing an MP3 or WMA track, you can only hear intermittent sounds.

•While playing an SD card, the playback order may differ from the one played back using other SD players.

•This receiver may be unable to play back some SD cards due to their characteristics or recording conditions.

•This receiver cannot play back mini SD card and MMC.

•If the inserted SD card does not have the correct files, you cannot select “SD” for the playback source.

Playing a CD-R or CD-RW

•Use only “finalized” CD-Rs or CD-RWs.

•This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

•This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation occurs on the lens inside the receiver.

–The pickup lens inside the receiver is dirty.

–CD-R/CD-RW on which the files are written with “Packet Write” method.

–Improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

•Do not use the following CD-Rs or CD-RWs:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.

56