4Finish the procedure.
indicator lights up.
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same procedure and select “Off” in step 3.
indicator goes off.
To tune in FM stations only with strong
If received signals are weak, you may only hear noises. You can make this unit detect only stations with sufficient signal strength while searching for FM stations.
1Enter the MODE menu (see page 5).
2Select “LO/DX.”
3Select “Local.”
DX
Local 
4Finish the procedure.
indicator goes off and 
indicator lights up.
Only stations with sufficient signal strength will be detected.
To tune in to all receivable stations, repeat the | ENGLISH | ||
same procedure and select “DX” in step 3. | |||
| |||
indicator goes off and | indicator |
| |
lights up. |
|
| |
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM
1
SOURCE
2Select the FM band (FM1 – FM3)
you want to store into.
BACK
BAND
3Enter the MODE menu (see page 5).
4Select “SSM.”
5
Local FM stations with the strongest signals are searched and stored automatically in the FM band.
To be continued....
11
