Operating external devices using the remote control (continued)
Using the remote control for the TV operation
Before the TV operation, select the remote control mode for the TV.
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
Setting the manufacturer code
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
1
2 Operate the remote control by pointing it at the TV..
Remote | Usage | |
control button | ||
[TV F] | Turns on/off the TV. | |
|
| |
[TV/VIDEO] | Changes between the TV and | |
video input. | ||
| ||
[CH | Changes channels. | |
[TV VOL | Adjusts volume. | |
Number but- | Selects the channels. | |
tons |
| |
100+) |
| |
| Changes between the previously | |
[TV RETURN] | selected channel and the current | |
| channel. |
NOTE
•When the remote control mode selector is slid to the lowest position and [TV] is pressed, some buttons may not work.
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•Hold down [DBS/VCR F] until you finish step 5.
3 Press [ENTER] and release.
4 Press number buttons to enter the manufacturer code.
Examples:
For an Echostar DBS: Press [2], then [1].
For a Sony DBS: Press [2], then [0].
When the manufacturer of your DBS has 2 or more codes, select the manufacturer codes in turn and find the one that operates the DBS and the remote control properly.
Manufacturer | Code |
G. I. | 01, 02, 03, 04, 05, 06, 07, 08 |
Echostar | 21 |
Hamlin | 15, 16, 17, 18 |
Jerrold | 01, 02, 03, 04, 05, 06, 07, 08 |
Pioneer | 13, 14 |
RCA | 19 |
Scientific Atlanta | 09, 10 |
Sony | 20 |
Zenith | 11, 12 |
The initial code setting is “01 (G.I.)”.
5 Release [DBS/VCR F].NOTE
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•Manufacturer codes are subject to change with- out notice. You may not be able to operate the DBS produced by the manufacturer.
•After replacing the batteries of the remote con- trol, set the manufacturer code again.
47