JVC 0597TOV*UN*SN, LYT0002-0P7A manual Auto Pause Quick REC Feature, Operation

Record-Standby Up

Normal Upside down

RecordRecord-Standby

Record-Standby Down

AUTO
P AUSE	APS ON APS OFF
APS ON

AUTO PAUSE

QUICK REC

			EN 13
FEATURE:	Auto Pause System
PURPOSE:	To automatically stop recording
	when the camcorder is pointed
	down, preventing accidental
	recordings of the ground, your feet,
	etc.
OPERATION:	1) Press AUTO PAUSE so that “APS
	ON” appears in the viewfinder for
	2 seconds. When the camcorder is
	tilted down by a large degree from
	its horizontal position during
	recording, the Record-Standby
	mode is automatically engaged.
	During this, “AUTO” is displayed
	above “	PAUSE	”.
	• To switch off the Auto Pause
	System, press AUTO PAUSE
	again so that “APS OFF” appears
	in the viewfinder for 2 seconds.
NOTES:	● The Auto Pause System is also
	effective when the camcorder is
	pointed up, or is positioned upside
	down.
	● Auto Pause also works when the
	camcorder is twisted by a large
	degree to the left or right.
	● When you want to shoot in any of
	the aforementioned positions, be
	sure to switch off Auto Pause.
FEATURE:	Quick Rec
PURPOSE:	To record a scene for 5 seconds,
	providing quick scene transitions like
	those seen in TV programmes.
OPERATION:	1) During Record–Standby, press and
	release QUICK REC. Recording
	starts, and after 5-second record-
	ing is finished, the camcorder
	reenters the Record–Standby mode
	automatically.
	• To continue shooting longer than
	5 seconds, press and hold
	QUICK REC. Recording
	continues as long as QUICK REC
	is kept pressed.
NOTES:	● The Fade/Wipe (☞ pg. 19) cannot
	be activated by pressing QUICK
	REC.
	● QUICK REC cannot be used during
	Animation and Time-Lapse
	(☞ pg. 27).