MENU |
| EN 25 | |
|
|
| |
|
|
|
|
Gain Up | NORM | To record a subject in a dimly lit environment. When it is |
|
|
| more convenient to shoot with a less coarse picture although |
|
|
| the subject becomes slightly dark. |
|
| OFF | Allows you to shoot dark scenes with no picture brightness |
|
|
| adjustment. |
|
|
|
|
|
Tele Macro | OFF | Usually set to this position. |
|
| ON | Usually the distance to a subject where the lens is in focus |
|
|
| depends on the zoom magnification. Unless there is a |
|
|
| distance more than 1m to the subject, the lens is out of focus |
|
|
| at the maximum telephoto setting. When set to “ON”, you |
|
|
| can shoot a subject as large as possible at a distance of |
|
|
| approx. 60 cm. |
|
|
| •Depending on the zoom position, the lens may go out of |
|
|
| focus. |
|
|
|
|
|
Interval Timer | OFF | This feature allows you to set the parameters for |
|
| 15s | (☞ pg. 26) and |
|
| 30s |
|
|
| 1min |
|
|
| 5min |
|
|
Rec Time | OFF | This feature allows you to set the parameters for Animation |
|
| 1/4s | and |
|
| 1/2s |
|
|
| 1s |
|
|
| 5s |
|
|
JLIP ID NO. | This number is necessary when connecting the camcorder to a device such |
| |
| as a computer using the J terminal (JLIP). (☞ pg. 45) |
| |
| The numbers range from 01 to 99. Factory setting is 07. |
| |
Tally | ON | The tally lamp comes on to signal the start of recording. |
|
| OFF | The tally lamp remains off at all times. |
|
|
|
|
|
Set Character | Allows you to input characters. (☞ pg. 21). |
| |
|
|
| |
Date/Time | Allows you to set the current date and time (☞ pg. 7). |
| |
= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case, use Manual Focus (☞ pg. 17).
