JVC LYT0275-001A Recording Mode Setting, SET Recording Mode, Set depending on your preference

MENU Button

Power lamp

EN11

Recording Mode Setting

Set depending on your preference.

	SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
	•The power lamp comes on and the camcorder is	STARTED
	turned on.
	ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears.
		GETTING
	SET RECORDING MODE
3 First move the highlight bar to “REC MODE” by
	rotating the Select Dial. Press the Select Dial and the
	parameter “SP” or “LP” is highlighted. Select “SP” or
	“LP” by rotating the Select Dial. Press the Select Dial
	twice to exit from the Recording Menu.
	•“LP” (Long Play) is more economical, providing 1.5
	times the recording time.
	•Audio Dubbing is impossible on a tape recorded in

Select Dial

Display

4	REC MODE		SP
	WIDE MODE		OFF
	ZOOM		128X
	GAIN UP		AGC
	TELE MACRO		OFF
	TO DATE / TIME MENU
	TO SYSTEM MENU
			DEC 25 ’ 98
			: 30
	END	– – – – –6– – – – –
4REC MODE
			SP
	WIDE MODE		OFF
	ZOOM		128X
	GAIN UP		AGC
	TELE MACRO		OFF

TO DATE / TIME MENU

TO SYSTEM MENU

	DEC 25 ’ 98
	: 30
END	– – – – –6– – – – –

Power Switch

Recording Menu

the LP mode.

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Recording mode indicator

4REC MODE		SP
WIDE MODE		OFF
ZOOM		X40
GAIN UP		AGC
TO DATE / TIME MENU
TO SYSTEM MENU
			DEC 25 ’ 98
		: 30
END	– – – – –6– – – – –

SPLP